Laser Engraving Near Bath on Powder Coated Metal Parts and cork – Bullfrog Bottles
In this case study we visit our customer Bullfrog. We laser engrave on a variety of their Bullfrog bottles and their cork yoga blocks. There are a wide variety of sizes, colours, and materials that Bullfrog offer their customers. Our task was to be part of their co-brand and personalisation offering to customers. Due to the wide range of products and the wide array of personalisation that is possible with the laser engraving process, the information that can be seen in this case study is a few corporate logos and personalisation.
For both the cork and Bullfrog bottle products we inhouse CO2 galvo system with a f-180 F-theta lens , the engraving process of these particular examples can vary depending on the amount of data contained within the laser engraving co-branding artwork. The laser mark is normally done with 2 passes, one to remove the powder costing and the other to clean up any primer that has been used.
For the bottles a ‘V’ shaped jig with a backstop is used to locate the part. So the use of this jig is ideal as it has the required ‘V’ shape to centralise the product under the laser and a back stop to ensure that the bottles are laser marked in the same position on the complete clients order. For the cork blocks a simple corner jigg is used. For better tolerances or more detailed parts, separate bespoke jig can be made and used by ourselves.
There are no guesses for which industry these components are used in. But for more information on this particular customer please visit Bullfrog, or if you have a specific requirement please use our contact page, link below.
If you would like further information on our Laser Engraving near Bath capabilities or anywhere else in the country. Please either visit our Case Studies page, request a call back or talk to one of our laser marking specialists by going to our contact page – link below.
Contact Us for Laser Engraving, Marking & Cutting Advice (thinklaser.theprogressteam.com/)
